100V - The compact control system

100V with its compact micro design is programmable with WinPLC7 and/or STEP7 from Siemens. Its high performance is based on the S7 300 instruction set. 100V offers, in addition to its tremendous versatility in use, a nearly unlimited flexibility and high efficiency. These Micro PLCs are especially suitable for use in smaller and cost-conscious application as the CPUs and fieldbus modules are easily expandable up to 160 I/O points by plugging in expansion modules.

Features

Innovative data saving concept
  • Integrated work memory - operation without additional memory card
  • Integrated ROM memory for continuous saving of program and data
  • Integrated battery backed RAM memory
  • Support of standard MMC cards for saving program and data

High flexibility in use & application
  • Centrally and decentrally deployable
  • MPI interface on board
  • Flexibly expandable with up to four signal and function modules
  • Central or distributed control deployable

Long-term investment security
  • Maintenance-free cage clamps
  • Front connector included
  • 24 month warranty
  • Certifications: cULus and CE



100V CPU Modules

100V: PLC CPU Modules

The Central Processing Unit (CPU) control and regulate processes in plant and machinery. The CPUs are selected according to application with the appropriate performance and memory and can be extended with signal and function modules, as well as communication processors. The 100V compact CPUs (micro PLC) already have integrated input and output capability and are designed for small to medium applications.

Each CPU has a front slot for a memory module as well as an MP2I interface. The CPU11x supports the standard MPI protocol, serial point-to-point communications. Therefore, in connection with the "Green Cable" from VIPA, direct and cost-effective programming is possible. The 100V CPU is ideal for use in control systems with a limited number of inputs and outputs, where previously the use of a PLC was not considered economical. Moreover, this CPU series offers the expansion capability using I/O modules from the distributed IO system 200V.


Features

  ⇨  Programmable with VIPA WinPLC7 or Siemens STEP7(WinPLC7 lite included)
  ⇨  Integrated work memory, operation without additional memory card possible
  ⇨  Integrated flash ROM memory for continuous saving of program and data
  ⇨  Integrated accumulator-backed RAM memory
  ⇨  Modular expandable, up to four signal and function modules can be used
  ⇨  Integrated real time clock as well as MPI interface on board
  ⇨  Compact design and modular construction, front connector included
  ⇨  Assembly with 35 mm profile rail using maintenance-free cage-clamp technology
  ⇨  24 months warranty

PLC CPU modules available

Module Part Number Description More Information
112-4BH02CPU 112 - Micro PLC, 8 (12) inputs, 8 (4) outputs, 8 kB work memory, 16 kB load memory112-4BH02 Datasheet 
114-6BJ02CPU 114 - Micro PLC, 16 (20) inputs, 8 (4) outputs, from which are 2 PWM 50 kHz outputs, 16 kB work memory, 24 kB load memory114-6BJ02 Datasheet 
114-6BJ03CPU 114 - Micro PLC, 16 (20) inputs, 8 (4) outputs, from which are 2 PWM 50 kHz outputs, 24 kB work memory, 32 kB load memory114-6BJ03 Datasheet 
114-6BJ04CPU 114 - Micro PLC, 16 (20) inputs, 8 (4) outputs, from which are 2 PWM 50 kHz outputs, 32 kB work memory, 40 kB load memory114-6BJ04 Datasheet 
114-6BJ52CPU 114R - Micro PLC, 16 inputs, 8 relay outputs, AC 230 V/ DC 30 V, 16 kB work memory, 24 kB load memory114-6BJ52 Datasheet 
114-6BJ53CPU 114R - Micro PLC, 16 inputs, 8 relay outputs, AC 230 V/ DC 30 V, 24 kB work memory, 32 kB load memory114-6BJ53 Datasheet 
114-6BJ54CPU 114R - Micro PLC, 16 inputs, 8 relay outputs, AC 230 V/ DC 30 V, 32 kB work memory, 40 kB load memory114-6BJ54 Datasheet 
115-6BL02CPU 115 - Micro PLC, 16 (20) inputs, 16 (12) outputs, from which are 2 PWM 50 kHz outputs, 16 kB work memory, 24 kB load memory115-6BL02 Datasheet 
115-6BL03CPU 115 - Micro PLC, 16 (20) inputs, 16 (12) outputs, from which are 2 PWM 50 kHz outputs, 24 kB work memory, 32 kB load memory115-6BL03 Datasheet 
115-6BL04CPU 115 - Micro PLC, 16 (20) inputs, 16 (12) outputs, from which are 2 PWM 50 kHz outputs, 32 kB work memory, 40 kB load memory115-6BL04 Datasheet 
115-6BL12CPU 115SER - Micro PLC, 16 (20) inputs, 16 (12) outputs, from which are 2 PWM 50 kHz outputs, 16 kB work memory, 24 kB load memory, RS232 interface115-6BL12 Datasheet 
115-6BL13CPU 115SER - Micro PLC, 16 (20) inputs, 16 (12) outputs, from which are 2 PWM 50 kHz outputs, 24 kB work memory, 32 kB load memory, RS232 interface115-6BL13 Datasheet 
115-6BL14CPU 115SER - Micro PLC, 16 (20) inputs, 16 (12) outputs, from which are 2 PWM 50 kHz outputs, 32 kB work memory, 40 kB load memory, RS232 interface115-6BL14 Datasheet 
115-6BL22CPU 115DP - Micro PLC, 16 (20) inputs, 16 (12) outputs, 16 kB work memory, 24 kB load memory, PROFIBUS-DP slave interface115-6BL22 Datasheet 
115-6BL23CPU 115DP - Micro PLC, 16 (20) inputs, 16 (12) outputs, from which are 2 PWM 50 kHz outputs, 24 kB work memory, 32 kB load memory, PROFIBUS-DP slave interface115-6BL23 Datasheet 
115-6BL24CPU 115DP - Micro PLC, 16 (20) inputs, 16 (12) outputs, 32 kB work memory, 40 kB load memory, PROFIBUS-DP slave interface115-6BL24 Datasheet 



100V Clamp Modules

200V: Clamp Module

Clamp modules are passive modules for 2- or 3-wire installations whose contacts are electrically connected internally vertically. They offer various connectivity options for signals, minus and plus potentials. The use of clamp modules allows for simple module power distribution thus offering the possibility for connection of active supplied sensors such as proximity switches.

Wiring is carried out by means of time saving and secure cage clamp technology. Passive terminal modules have no connection to the backplane bus. The terminal modules are attached to the mounting surface using a 35 mm profile rail.


Features

  ⇨   Maintenance-free cage clamp technique
  ⇨   Backplane bus feed-through
  ⇨   Max. terminal voltage 10A
  ⇨   Mounting on a 35mm DIN rail
  ⇨   24 month guarantee

100V Clamp module available

Module Part Number Description More Information
101-4FH50CM 101 - Clamp modules, 8x11 clamps, Passive101-4FH50 Datasheet 



100V Digital Signal Modules

100V: Digital Signal modules

The digital signal modules that connect to sensors (inputs - I) and actuators (outputs - O) are the interfaces to the process being controlled. Digital input modules acquire the binary control signals from the process and transform them into interpretable signals for the controller. Digital output modules convert the internal binary control signals into signals suitable for process control. With the expansion modules EM 123, the number of inputs/outputs of the CPU 114/115 is expanded. The connection is made to the CPU via a single tier bus connector supplied with the module.

Characteristics

  ⇨   Up to 32 digital inputs and outputs on an expansion module
  ⇨   Combinable with signal modules from the System 200V
  ⇨   LED status indicator
  ⇨   Maintenance-free cage-clamp technology
  ⇨   Label cards included
  ⇨   Bus connector included
  ⇨   Assembly with 35 mm profile rail
  ⇨   24 months warranty


Digital modules available

Module Part Number Description More Information
123-4EH01EM 123 - Expansion module, digital, 8 inputs/ 8 outputs, DC 24 V123-4EH01 Datasheet 
123-4EJ01EM 123 - Expansion module, digital, 16 inputs/ 8 outputs, DC 24 V123-4EJ01 Datasheet 
123-4EJ11EM 123 - Expansion module, digital, 16 inputs, 8 relay outputs123-4EJ11 Datasheet 
123-4EJ20EM 123 - Expansion module, digital, 16 inputs, AC/DC 60...230 V, 8 relay outputs123-4EJ20 Datasheet 
123-4EL01EM 123 - Expansion module, digital, 16 inputs/ 16 outputs, Isolated123-4EL01 Datasheet 




100V Analogue Signal Modules

100V: Analogue Signal module

The analogue signal module is one of the interfaces to connect sensors and actuators from the physical, real world process being controlled to the PLC. Analogue signal modules acquire the analogue control signals (e.g. measurement data) from the process level. The analogue control signals are acquired from the process and converted into interpretable signals for the digital controller.

The analogue output module converts the internal digital control signals into analogue signals suitable for the process equipment.

With expansion modules EM 123, the number of inputs/outputs of the CPU 114/115 is expanded. The connection is made to the CPU via a single tier bus connector supplied with the module.


Characteristics

  ⇨   Up to 6 analog inputs and outputs on an expansion module
  ⇨   Combinable with signal modules from the system 200V
  ⇨   LED Status Indicator
  ⇨   Maintenance-free cage-clamp technology
  ⇨   Front and bus connector included
  ⇨   Assembly with 35 mm profile rail
  ⇨   24 months warranty


Analogue module available

Module Part Number Description More Information
134-4EE00 EM 134 - Expansion module, analog, 3 inputs U/I, 1 input Pt, Ni, R, 2 outputs U/I, Configurable 134-4EE00 Datasheet 




100V Interface Modules

100V: Interface Modules

The Interface modules are fieldbus slave modules for the decentralised expansion of the control systems with integrated digital inputs/outputs. The fieldbus slave modules are available in various designs.


Characteristics

  ⇨   Available for PROFIBUS and CANopen
  ⇨   Up to 125 DP slaves to a DP master
  ⇨   Bus connector included
  ⇨   LED status indicator
  ⇨   Maintenance-free cage clamp technology
  ⇨   Assembly with 35 mm profile rail
  ⇨   24 month warranty


Interface modules available

Module Part Number Description More information
151-4PH00 SM 151 - PROFIBUS-DP slave, digital, PROFIBUS-DP slave, 16 inputs 151-4PH00 Datasheet 
151-6PH00 SM 151 - PROFIBUS-DP slave, digital, PROFIBUS-DP slave, 16 inputs, 4x11 clamps 151-6PH00 Datasheet 
151-6PL00 SM 151 - PROFIBUS-DP slave, digital, PROFIBUS-DP slave, 32 inputs 151-6PL00 Datasheet 
152-4PH00 SM 152 - PROFIBUS-DP slave, digital, PROFIBUS-DP slave, 16 outputs 152-4PH00 Datasheet  
152-6PH00 SM 152 - PROFIBUS-DP slave, digital, PROFIBUS-DP slave, 16 outputs, 4x11 clamps 152-6PH00 Datasheet  
152-6PL00 SM 152 - PROFIBUS-DP slave, digital, PROFIBUS-DP slave, 32 outputs 152-6PL00 Datasheet  
153-4CF00 SM 153 - CANopen slave, digital, CAN slave, 8 channels as inputs or outputs, 2x11 clamps 153-4CF00 Datasheet 
153-4CH00 SM 153 - CANopen slave, digital, CAN slave, 8 (12) inputs, 4 (8) outputs 153-4CH00 Datasheet  
153-4PF00 SM 153 - PROFIBUS-DP slave, digital, PROFIBUS-DP slave, 8 channels as inputs or outputs, 2x11 clamps 153-4PF00 Datasheet  
153-4PH00 SM 153 - PROFIBUS-DP slave, digital, PROFIBUS-DP slave, 8 inputs, 8 outputs 153-4PH00 Datasheet  
153-6CH00 SM 153 - CANopen slave, digital, CAN slave, 8 (12) inputs, 4 (8) outputs, 4x11 clamps 153-6CH00 Datasheet  
153-6CL10 SM 153 - CANopen slave, digital, CAN slave, 24 inputs, 8 outputs 153-6CL10 Datasheet  
153-6PH00 SM 153 - PROFIBUS-DP slave, digital, PROFIBUS-DP slave, 8 inputs, 8 outputs, 4x11 clamps 153-6PH00 Datasheet  
153-6PL00 SM 153 - PROFIBUS-DP slave, digital, PROFIBUS-DP slave, 16 inputs, 16 outputs 153-6PL00 Datasheet  
153-6PL10 SM 153 - PROFIBUS-DP slave, digital, PROFIBUS-DP slave, 24 inputs, 8 outputs 153-6PL10 Datasheet