300s - The high-speed control system

The 300S is powered by SPEED7 which makes this system one of the fastest and most efficient, micro controller based systems worldwide, programmable with WinPLC7 and/or STEP7 from Siemens.

The CPUs, with their SPEED7 technology, have impressive speed at responding to real world process events such signal processing.

The unique MemoryManagement (memory expansion concept) from VIPA enables the memory adaption by simple change of the MicroMemoryCard without replacing the CPU. The VIPA worldwide recognised 'AdvancedKnowHow-Protect' is available to protect your know how. The attractive range of integrated communication interfaces, like Ethernet, ensures you have flexibility.

It is especially advantageous that operation of the 300S CPU is possible without an additional memory card. If required the integrated work memory can be expanded individually up to 8MByte with the VIPA MCC - MemoryConfigurationCard - depending on the CPU type. The 300S-CPU grows with your programming. All 300S CPUs are equipped with Ethernet for PG/OP communication as standard.

Our 300S COMPACT CPUs with integrated SPEED7 technology and I/O periphery are especially suitable for cost sensitive applications. Our 300S is suitable for nearly every demanding applications with its high-speed performance, the scalable memory and the outstanding communication possibilities.

Features

High speed for every use
  • Integrated SPEED7 processor for outstanding performance
  • Optional SPEED-Bus for the expansion with High-Speed signal modules and communication processors

Clever memory management & data security
  • Integrated work memory - operation without additional memory card!
  • Flexible extension of the memory using a Memory Configuration Card (MCC)
  • Integrated battery backed RAM memory
  • The secure AdvancedKnowHow-Protect is available for the know how

Comprehensive communication capability and modern protocols
  • Ethernet-, PROFIBUS-DP-, serial RS485 and MPI interface on board
  • Optional: Profinet, CANopen, Interbus, Seriel, Modbus RTU, Modbus on TCP, UDP, RFC1006, EtherCAT

High flexibility in use & application
  • Designed compatibility of the S7 300 from Siemens
  • Mixed operation is supported for VIPA and Siemens modules in the same rack
  • Centrally and decentrally deployable
  • Modularly expandable
  • Fast analog modules: Conversion of 4 analog channels in 100 µs
  • Flexible digital modules: Reaction time of the channels freely adjustable between 2.65 µs up to 40 ms

Long-term investment security
  • Centrally deployable up to 32 modules - directly on the CPU!
  • Individually expandable reserve in performance and capacity
  • 24 month warranty
  • Certifications: cULus and CE



300S CPU Modules

300S: PLC CPU Modules

The Central Processing Unit (CPU) control and regulate processes in plant and machinery. The CPUs are selected according to application with the appropriate performance and memory and can be extended with signal and function modules, as well as communication processors. The 300S CPUs are designed so they are command compatible to Siemens STEP7. They are suitable for medium and large applications.

The CPUs are based on the SPEED7 technology in which the CPU is supported by co-processors. The integrated SPEED7 ASIC chip is among the world's fastest automation systems.

With a wide range of CPU options available this makes the 300S system universally deployable: From C-class CPUs with integrated I/O peripherals for smaller applications up to CPU versions with integrated Ethernet, fieldbus master interfaces, and high-speed bus. The CPUs of System 300S make it possible for short machine cycle times due to their high processing speed, and are therefore particularly suitable for complex control and automation tasks in the manufacturing and process industries. The compact CPUs with integrated I/Os are designed especially for cost-sensitive applications.


Features

  ⇨  High-speed control system
  ⇨  Programmable with VIPA WinPLC7 or Siemens STEP7
  ⇨  Integrated work memory, operation without additional memory card possible
  ⇨  Integrated accumulator-backed RAM memory
  ⇨  Integrated real time clock as well as Ethernet, PROFIBUS-DP and MPI interface on board
  ⇨  Flexible work memory extension through MCC memory extension card
  ⇨  Support of MMC cards for saving of program and data
  ⇨  SPEED-Bus for extension with high-speed signal modules and communication processors (CPU 314ST, 317SE, 317SN ans 317PN)
  ⇨  Centralized and decentralized use and modular extendable
  ⇨  24 months warranty

PLC CPU modules available

Module Part Number Description More Information
312-5BE13CPU 312SC - SPEED7 technology, 16 x DI, 8 x DO,64 kB work memory, Memory extension (max. 512 kB), PtP interface, also configurable via TIA-Portal312-5BE13 Datasheet 
313-5BF13CPU 313SC - SPEED7 technology, 24 x DI, 16 x DO, 4 x AI, 2 x AO, 1 x AI Pt100, 128 kB work memory, Memory extension (max. 512 kB), PtP interface, also configurable via TIA-Portal313-5BF13 Datasheet 
313-6CF13CPU 313SC/DPM - SPEED7 technology, 16 x DI, 16 x DO, 128 kB work memory, Memory extension (max 512 kB), PROFIBUS-DP master / PtP (switchable), also configurable via TIA-Portal313-6CF13 Datasheet 
314-2AG12CPU 314SB/DPM - SPEED7 technology, 256 kB work memory, Memory extension (max. 512 kB), PROFIBUS-DP master / PtP (switchable)314-2AG12 Datasheet 
314-2AG13CPU 314SB/DPM - SPEED7 technology, 256 kB work memory, Memory extension (max. 512 kB), PROFIBUS-DP master / PtP (switchable), also configurable via TIA-Portal314-2AG13 Datasheet 
314-2BG03CPU 314SE/DPS - SPEED7 technology, 128 kB work memory, Memory extension (max. 512 kB), PROFIBUS-DP slave / PtP (switchable), also configurable via TIA-Portal314-2BG03 Datasheet 
314-6CF02CPU 314ST/DPM - SPEED7 technology, SPEED-Bus, 8 x DI, 8 x DIO, 4 x AI, 2 x AO, 1 x AI Pt100, 512 kB work memory, Memory extension (max. 2 MB), PROFIBUS-DP master / PtP (switchable)314-6CF02 Datasheet 
314-6CF03CPU 314ST/DPM - SPEED7 technology, SPEED-Bus, 8 x DI, 8 x DIO, 4 x AI, 2 x AO, 1 x AI Pt100, 512 kB work memory, Memory extension (max. 2 MB), PROFIBUS-DP master / PtP (switchable), also configurable via TIA-Portal314-6CF03 Datasheet 
314-6CG13CPU 314SC/DPM - SPEED7 technology, 24 x DI, 16 x DO, 8 x DIO, 4 x AI, 1 x AI Pt100, 2 x AO, 256 kB work memory, Memory extension (max. 1 MB), PROFIBUS-DP master / PtP (switchable), also configurable via TIA-Portal314-6CG13 Datasheet 
315-2AG12CPU 315SB/DPM - SPEED7 technology, 1 MB work memory, Memory extension (max. 2 MB), PROFIBUS-DP master / PtP (switchable315-2AG12 Datasheet 
315-2AG13CPU 315SB/DPM - SPEED7 technology, 1 MB work memory, Memory extension (max. 2 MB), PROFIBUS-DP master / PtP (switchable), also configurable via TIA-Portal315-2AG13 Datasheet 
315-4EC12CPU 315SN/EC - SPEED7 technology, 1 MB work memory, Memory extension (max. 2 MB), PROFIBUS-DP master / PtP (switchable), EtherCAT controller integrated 315-4EC12 Datasheet 
315-4EC32CPU 315SN/EC ECO - SPEED7 technology, 512 KB work memory, PtP, EtherCAT Master integrated315-4EC32 Datasheet 
315-4NE12CPU 315SN/NET - SPEED7 technology, 1 MB work memory, Memory extension (max. 2 MB), PROFIBUS-DP master / PtP (switchable), CP 343 integrated315-4NE12 Datasheet 
315-4NE13CPU 315SN/NET - SPEED7 technology, 1 MB work memory, Memory extension (max. 2 MB), PROFIBUS-DP master / PtP (switchable), CP 343 integrated, also configurable via TIA-Portal315-4NE13 Datasheet 
315-4PN12CPU 315SN/PN - SPEED7 technology, 1 MB work memory, Memory extension (max. 2 MB), PROFIBUS-DP master / PtP (switchable), PROFINET controller integrated, also configurable via TIA-Portal315-4PN12 Datasheet 
315-4PN33CPU 315SN/PN ECO - SPEED7 technology, 512 KB work memory, PtP, PROFINET controller integrated, also configurable via TIA-Portal315-4PN33 Datasheet 
317-2AJ12CPU 317SE/DPM - SPEED7 technology, SPEED-Bus, 2 MB work memory, Memory extension (max. 8 MB), PROFIBUS-DP master / PtP (switchable)317-2AJ12 Datasheet 
317-2AJ13CPU 317SE/DPM - SPEED7 technology, SPEED-Bus, 2 MB work memory, Memory extension (max. 8 MB), PROFIBUS-DP master / PtP (switchable), also configurable via TIA-Portal317-2AJ13 Datasheet 
317-4EC12CPU 317SN/EC - SPEED7 technology, SPEED-Bus, 2 MB work memory, Memory extension (max. 8 MB), PROFIBUS-DP master / PtP (switchable), EtherCAT-Master integrated317-4EC12 Datasheet 
317-4NE12CPU 317SN/NET - SPEED7 technology, SPEED-Bus, 2 MB work memory, Memory extension (max. 8 MB), PROFIBUS-DP master / PtP (switchable), CP 343 integrated317-4NE12 Datasheet 
317-4NE13CPU 317SN/NET - SPEED7 technology, SPEED-Bus, 2 MB work memory, Memory extension (max. 8 MB), PROFIBUS-DP master / PtP (switchable), CP 343 integrated, also configurable via TIA-Portal317-4NE13 Datasheet 
317-4PN12CPU 317SN/PN - SPEED7 technology, SPEED-Bus, 2 MB work memory, Memory extension (max. 8 MB), PROFIBUS-DP master / PtP (switchable), PROFINET Controller integrated, also configurable via TIA-Portal317-4PN12 Datasheet 



300S Power Supply Modules

300S: Power Supply Modules

Power supply modules are used to supply the system as well as the sensors and actuators with direct current. They convert the mains AC voltage into a DC voltage of 24 V.

Power supply modules can be fixed on a 35 mm profile rail either combined with system 300S components or as "stand-alone" modules. The power supply has no connection to the backplane bus.


Characteristics

  ⇨   Depending on the model Automatic Wide Range Input detection (AC 100 V - 240 V) or manual switching AC 120/230 V
  ⇨   Connection to single phase AC mains
  ⇨   Nominal input voltage AC 120/230 V, 50/60 Hz
  ⇨   Nominal output voltage DC 24 V
  ⇨   Safe electrical isolation according to EN 60 950
  ⇨   Can be used as load power supply
  ⇨   Front integrated status LEDs for fault diagnosis
  ⇨   Protection against short circuit, overload and open circuit
  ⇨   IP 20 protection
  ⇨   Compact design
  ⇨   24 months warranty

Characteristics for SPEED-Bus power supply, Power supply for the CPU 317S

  ⇨   Automatic start-up with the power of the CPU 317S
  ⇨   Output current 5.5 A, total output current max. 10 A
  ⇨   Defined power-down in the case of a power supply failure
  ⇨   Protection against short circuit and overload
  ⇨   Overheat protection


Power modules available

Module Part Number Description More Information
307-1BA00PS 307 - Power supply, Output current 2.5 A, Output voltage DC 24 V, AC 100...240 V without manual switch307-1BA00 Datasheet 
307-1EA00PS 307 - Power supply, Output current 5 A, Output voltage DC 24 V, AC 120/230 V, 60/50 Hz switchable307-1EA00 Datasheet 
307-1FB70PS 307S - Power supply - SPEED-Bus - only for CPU 317S, Output current 5.5A307-1FB70 Datasheet 
307-1KA00PS 307 - Power supply, Output current 10 A, Output voltage DC 24 V, AC 120/230 V, 60/50 Hz switchable 307-1KA00 Datasheet 



300S Digital Signal Modules

300S: Digital Signal modules

The digital signal modules that connect to sensors (inputs - I) and actuators (outputs - O) are the interfaces to the process being controlled. Digital input modules acquire the binary control signals from the process and transform them into interpretable signals for the controller. Digital output modules convert the internal binary control signals into signals suitable for process control.

Characteristics

  ⇨  High-Speed DI-module for the SPEED-Bus (parameters 2.56 µs ... 40 ms)
  ⇨  High-Speed DO-module for the SPEED-Bus (100 kHz)
  ⇨  Compact design
  ⇨  LED-status indicator
  ⇨  Electrically isolated to the backplane bus
  ⇨  Selectable connection method - screw terminals or cage clamps
  ⇨  Label strips included and easily visible on the front
  ⇨  24 months warranty


Digital modules available

Module Part Number Description More Information
321-1BH01SM 321 - Digital input, 16 inputs321-1BH01 Datasheet 
321-1BH70SM 321S - FAST Digital input - SPEED-Bus, SPEED-Bus, 16 fast inputs, can be configured as alarm/ETS321-1BH70 Datasheet 
321-1BL00SM 321 - Digital input, 32 inputs321-1BL00 Datasheet 
321-1FH00SM 321 - Digital input, 16 inputs in groups of 4, AC 120/230 V321-1FH00 Datasheet 
322-1BF01SM 322 - Digital output, 8 outputs in groups of 4, Output current 2 A322-1BF01 Datasheet 
322-1BH01SM 322 - Digital output, 16 outputs in groups of 8, Output current 1 A322-1BH01 Datasheet 
322-1BH41SM 322 - Digital output, 16 outputs in groups of 8, DC 24 V, Output current 2 A322-1BH41 Datasheet 
322-1BH60SM 322 - Digital output, 16 outputs, 1 input (activation for outputs), 16 switches (automatic, manual 0/1), Output current 0.5 A322-1BH60 Datasheet 
322-1BH70SM 322S - FAST Digital output - SPEED-Bus, SPEED-Bus, 16 fast outputs, Output current 0.5 A322-1BH70 Datasheet 
322-1BL00SM 322 - Digital output, 32 outputs in groups of 8, DC 24 V, Output current 1 A 322-1BL00 Datasheet 
322-1HH00SM 322 - Digital output, 16 relay outputs in groups of 8, AC 230 V/ DC 30 V, Contact rating per channel 5 A322-1HH00 Datasheet 
322-5FF00SM 322 - Digital output, 8 outputs in groups of 1, AC 120/230 V, Output current 2 A, Substitute value output (programmable)322-5FF00 Datasheet 
323-1BH00SM 323 - Digital in-/output, 16 channels (as inputs or outputs), Diagnostic function, Output current 1 A323-1BH00 Datasheet 
323-1BH01SM 323 - Digital in-/output, 8 inputs/ 8 outputs, Output current 1 A323-1BH01 Datasheet 
323-1BH70SM 323S - FAST Digital in-/output - SPEED-Bus, SPEED-Bus, 16 fast inputs/outputs, Output current 0.5 A323-1BH70 Datasheet 
323-1BL00SM 323 - Digital in-/output, 16 inputs/ 16 outputs, Output current 1 A323-1BL00 Datasheet 




300S Analogue Signal Modules

100V: Analogue Signal module

The analogue signal module is one of the interfaces to connect sensors and actuators from the physical, real world process being controlled to the PLC. Analogue signal modules acquire the analogue control signals (e.g. measurement data) from the process level. The analogue control signals are acquired from the process and converted into interpretable signals for the digital controller.

The analogue output module converts the internal digital control signals into analogue signals suitable for the process equipment.


Characteristics

  ⇨  Large selection. Modules are available for all popular applications
  ⇨  High speed AI-module for the SPEED-Bus (parameterization capable with integrated cache memory)
  ⇨  Compact design
  ⇨  LED-status indicator
  ⇨  Electrically isolated to the backplane bus
  ⇨  Selectable connection method - screw terminals or cage clamps
  ⇨  Label strips included and easily visible on the front
  ⇨  24 month warranty


Analogue module available

Module Part Number Description More Information
331-1KF01SM 331 - Analog input, 8 inputs 13 bit, Voltage, current, Resistance, Resistance thermometer331-1KF01 Datasheet 
331-7AF70SM 331S - Analog input FAST - SPEED-Bus , 8 inputs, Current ±20 mA, Oscilloscope/FIFO function, Interrupt configurable with parameters331-7AF70 Datasheet 
331-7BF70SM 331S - Analog input FAST - SPEED-Bus, 8 inputs, Voltage ±10 V, Oscilloscope/FIFO function, Interrupt configurable with parameters331-7BF70 Datasheet 
331-7KB01SM 331 - Analog input, 2 inputs in 1 group, Voltage, current, Resistance, Resistance thermometer, Thermocouples331-7KB01 Datasheet 
331-7KF01SM 331 - Analog input, 8 inputs in 4 groups, Voltage, current, Resistance, Resitance thermometer, Thermocouples331-7KF01 Datasheet 
332-5HB01SM 332 - Analog output, 2 outputs, Configurable, Voltage, current332-5HB01 Datasheet 
332-5HD01SM 332 - Analog output, 4 outputs, Configurable, Voltage, current332-5HD01 Datasheet 
334-0KE00SM 334 - Analog in/output, 4 inputs, 2 outputs, Configurable, Resistance, Voltage 0...10 V334-0KE00 Datasheet 




300S Communication Processors

300S: Communications Processors

Communications processors are used to connect different target and source systems, e.g. via Ethernet to higher-level ERP systems or serially to scanners, printers and other peripherals.

Characteristics

  ⇨   High performance
  ⇨   Simple to configure using parameters
  ⇨   Support for common communication protocols
  ⇨   Compact design
  ⇨   LED-status indicator
  ⇨   Electrically isolated from the backplane bus
  ⇨   24 month warranty


Communication processor modules available

Module Part Number Description More Information
341-1AH01CP 341 - Communication processor, RS232 isolated, Function compatibility to Siemens CP 341, Set parameters via the Siemens parameterisation package, Data transfer rate up to 76.8 kbit/s, Power supply via backplane bus 341-1AH01 Datasheet 
341-1CH01CP 341 - Communication processor, RS422/485, isolated, Function compatibility to Siemens CP 341, Set parameters via the Siemens parameterisation package, Data transfer rate up to 76.8 kbit/s, Power supply via backplane bus 341-1CH01 Datasheet 
341-2CH71CP 341S - Communication processor - SPEED-Bus, 2x RS422/485, isolated, SPEED-Bus, Data transfer rate up to 115.2 kbit/s, Integrated diagnostics buffer 341-2CH71 Datasheet 
342-1CA70CP 342S CAN - CANopen master - SPEED-Bus, CANopen master, SPEED-Bus, 125 CAN slaves connectable, 40 Transmit PDOs, 40 Receive PDOs, 1 SDO (Server), 127 SDO (Client), Project engineering: VIPA WinCoCT 342-1CA70 Datasheet 
342-1DA70CP 342S DP - PROFIBUS-DP master - SPEED-Bus, PROFIBUS-DP master (Class 1), SPEED-Bus, RS485, 124 DP slaves connectable, Project engineering: Siemens SIMATIC Manager, Diagnostics 342-1DA70 Datasheet 
342-1IA70CP 342S IBS - INTERBUS master - SPEED-Bus, INTERBUS master, SPEED-Bus, RS422, Diagnostics via LEDs, RS232, Mini-DIN, Dual Port Master, Up to 512 slaves connectable 342-1IA70 Datasheet 
342-2IA71CP 342S IBS - INTERBUS master - SPEED-Bus, Dual INTERBUS master, SPEED-Bus, 2x RS422, Diagnostics via LEDs, diagnostics device (2x RJ45), Dual Port Master, Up to 512 slaves 342-2IA71 Datasheet 
343-1EX71CP 343S TCP/IP - Ethernet-CP 343 - SPEED-Bus, Ethernet CP 343S-NET, SPEED-Bus, RJ45, 16 connections via Siemens NetPro, 64 connections via user program, 32 PG/OP 343-1EX71 Datasheet 
343-2AH10CP 343-2P ASI - AS-i master, Up to 62 slaves connectable, Corresponding to AS-i specification 3.0 (master profile M3), Support of analogue slaves concerning profile 7.3 resp. 7.4, Automatic address programming possible (address 0) 343-2AH10 Datasheet 




300S Interface Modules

300S: Interface Modules

The Interface module is a PROFIBUS-DP fieldbus slave module for the decentralised expansion of the control systems with integrated digital inputs/outputs.


Characteristics

  ⇨   Cross manufacturer deployable
  ⇨   Cross manufacturer mixed operation possible
  ⇨   Compact design
  ⇨   LED-status indicator
  ⇨   Advanced diagnostics
  ⇨   Electrically isolated to the backplane bus
  ⇨   Profile rail construction
  ⇨   24 month warranty


Interface module available

Module Part Number Description More information
353-1DP01 IM 353DP - PROFIBUS-DP slave (DP-V0, DP-V1)
For max. 29 peripheral modules (16 analogue), 244 Byte input and 244 Byte output data
Integrated DC 24V power supply
353-1DP01 Datasheet 
User manual (0.6MB)